Exclusive Services
Welcome to Marine Detailing Ireland Boat & Yacht Services Page. We aim to bring your boat back to looking brand new, using the best products and machines available to get the job done! Whether your boat is large or small, we assure you that we will get the job done in a timely manner while achieving the highest standards possible. We are a 100% mobile company, and can go to any location or marina across Ireland.
Don't hesitate to ask us about improving your boat's appearance!
1
Exterior Wash, Wax & Detail
This package - with a good clean and trusty wax - will protect the shine your boat already has. Waxing will protect your boat against the worst the weather can throw at us.
-
Wash
-
Anti-skid cleaning
-
Vinyl Cleaning
-
Compartment Cleaning
-
Mould & Mildew Removal
2
Gelcoat/Paint Restoration
Your boat may look faded, dull or discoloured due to oxidation from the sun and water.
Regardless of the condition of your gelcoat/paint, it can be restored to a like-new or better-than-new finish with a multistage machine polishing regime, and if needed, wet sanding.
All surfaces that are polished will be sealed to protect from future fading with either wax or ceramic coating.
3
Interior Valets
Bring your interior back to life with a rigorous interior valet:
-
Carpet shampooing & wet vacuuming
-
Stain Removal
-
Bathroom cleaning
Interior valets can be scheduled regularly throughout the year to maintain that homely feeling in your vessel.
4
Ceramic Coatings
The most durable protective seal on the market!
Ceramic coating can be applied to any surface on your boat - interior or exterior. It guarantees up to three years protection against fading/oxidation of gelcoat, paint or polished material.
Ceramic coating creates a smooth finish that prevents dirt and grime from sticking to it, and allows effortless cleaning.
It's protection ensures no need for additional waxes for the next three years!
5
Gelcoat / Fibreglass Repair
Accidents happen - and boats are no strangers to damage from bangs and scrapes.
We can repair minor fibreglass/gelcoat damage, and consult on major damage.
6
Teak Restoration
We use a two-stage restore & protect method to maintain teak. Optionally an additional sealant can be applied.
Aged teak with damaged caulking is likely to require sanding prior to restoration & protection to produce the best possible results.
7
Vinyl Graphics
We can remove and replace worn vinyl stickers that have been in place for years.
Removal of a sticker may reveal a brighter, bumpier paint / gelcoat (termed ghosting) which has not been exposed to the sun over the years. This area can be wet sanded to remove imperfections left by the sticker, and ensure a uniform finish.
If requested, we apply new vinyl graphics, including names; registration numbers; and any personalised decals.
8
Antifouling
Basic Package
We apply two coats of antifoul to the hull of your boat, with the option of a third coat applied around the waterline.
​
Premium Package
Previous coats of antifoul are sanded down, and any imperfections in the hull are filled in to ensure a smooth finish to the hull. Two or three coats of antifoul are then applied.
This ensures better fuel efficiency and faster hull speed. See below for more information.
9
Race Preparation
Previous coatings of antifoul are sanded until the hull is smooth, to which three or four fresh coats of antifoul are then applied. Once these fresh coats of antifoul are dry, they are lightly sanded to ensure the smoothest finish to your boats hull.
The smoother the surface of your boat's hull, the faster and more fuel efficient the boat will be!
​
-
Bright work polishing
-
Hull Cleaning
-
Engine Cleaning (under 36ft)
-
Rub Rail Wax
-
Topside Wax
​
-
Berth cleaning
-
Glass cleaning
-
Interior metal work polishing